Pegasus Auto Racing Supplies
Providing great service since 1980
| Today's Featured Items | |||
|---|---|---|---|
AiM MXm Compact Dash Logger The super-compact (137 x 89mm) MXm is the smallest data logging dash from AiM. Despite its size, it can display and log the same data as any other AiM system. |
AN4 Airframe Bolt, 1/4-28 Thread AN4 Airframe bolts have 1/4-28 threads (0.469 inch thread length except on -3 size). Part numbers ending in A indicate undrilled shanks. |
Cartek Power Distribution Module only The solid-state Cartek PDM can switch 4 individual circuits of up to 10 amps each. You can even use a low-voltage output from your data logger as a trigger. | |
Bell GTX.3 Helmet, Snell SA2020 / FIA 8859 The Bell GTX.3 auto racing helmet has excellent high-speed aero stability. Venturi air extraction makes it ideal for dirt or clay tracks. Snell SA2020 Approved. |
Cool Shirt Insulated Y- Hose Kit, 8 foot with Connectors Save money and weight by sharing a cooler! This splitter hose kit makes it possible to connect a driver and navigator (or two crew members) to a single Cool Shirt cooling system (sold separately). |
51mm (2 inch) Pegasus Pro Design Aluminum Hose Joiner Use our 2 inch OD anodized aluminum joiner to connect any two 51mm ID silicone hoses - an elbow to a straight section, two elbows, or a reducer to an elbow. | |
Orange Silicone 500F CAC Hose, 3.50" ID, 6" Length Charge Air Cooler hose is designed to handle the pressure in boost applications. This 6" long Orange straight hose fits over 3.5" OD metal intake pipes. |
AN365 Nylock Hex Nut (MS20365) AN365 (MS20365 / MS21044) are Military Specification nylon locking nuts, rated at 125,000 psi and up to 250F. AN365 are full-height for bolts loaded in tension. |
Hawk Brake Pad, FF, F2000, Lockheed LD20 (CP2399) (D5) These Hawk Racing Brake Pads fit the large AP-Lockheed LD20 caliper used in Formula Ford, FC/FF2000, and Sports 2000. Also fits ICP-20 and Wilwood WLD20 calipers. | |
Push-Pull Cable with Clip-in Ends, 1/4-28 Thread Here is our push pull cable with 1/4-28 threads with clip in jacket ends. often used for sway bar adjustments, shifter cables, even throttle cables. |
Super Flexible Battery Cable, 6 Gauge, Red Our 6 gauge racing battery cable is constructed of hundreds of very fine pure copper strands with thick, durable, and oil resistant insulation for maximum vibration resistance. |
Chillout 4" Carbon Fiber NACA Duct Keeping true to Chillout's "lighter is faster" here is their carbon fiber NACA duct to duct airflow from the car body to the chillout unit. | |
Facet Dura-Lift 12v Fuel Pump, 1/8 NPT, 12-15 psi, 60" Lift Facet Dura-Lift pumps are able to draw fuel from farther away than standard Facet pumps. This pump can lift up to 60 inches and can deliver up to 50 GPH. |
Low Pressure Flapper Valve, Male AN Fittings Our low-pressure check valves allow virtually unimpeded flow in one direction, yet the internal flapper prevents flow in the opposite direction. They are used in AN fuel and oil scavenge lines. |
Aeromotive Bypass EFI Regulator, 30-70 psi, 3x -6 ORB This high-pressure Aeromotive bypass-type fuel pressure regulator can be set between 30 and 70 psi for injected engines up to 1000 HP. Three -6 O-Ring boss ports. | |
910 PTFE Lined Aramid Braided Lightweight Racing Hose Super-flexible, ultra-light Goodridge 910 aramid braided hose was developed for pro racing teams. PTFE liner resists all fluids and stops fuel vapor penetration. |
Matte Gaffer's Tape, 2" x 55 Yard Roll, specify color Gaffer's Tape is like racer's tape but without the shiny plastic covering. The adhesive is less permanent, perfect for covering decals or any other temporary taping duty. |
Bell 281 SRV Helmet Shield for BR.1, Sport, M3, M.4, Vortex This Bell 281 SRV Helmet shield fits Sport, Vortex and M3 models. The SRV system has a smooth curved slot in front of the pivot. | |
AeroCatch Plus Flush Mount Hood Pins, Set of 2 The low-profile AeroCatch makes other hood pins obsolete! Just push the lever down to engage the hidden pin and safety catch in one motion. Push the latch button and pull the lever to release. |
SPA GT / Le Mans Mirror, Nylon, Flat Lens, Right Hand These SPA GT / Sedan right hand mirrors have the same look and styling as our F1 mirror with a lens measuring 2.625" x 5.75" to meet FIA specifications for GT cars. Very wide range of adjustment. |
Quick-Disconnect Plug to 10AN Hose Barb, 5000 Series This Jiffy-Tite 5000 series quick-disconnect plug to a 10AN hose barb flows 7.86 gpm with a 5psi inlet pressure. Lightweight and compact with excellent wear resistance, and 100% leak tested. | |
Top Quality, Huge Selection and Very Competitive Prices on Silicone Hose
Nearly 1,000 different part numbers are now in stock from 1/2 inch to 6 inch inside diameter. Available in black, blue or red. Save on our durable, heat-resistant, high-quality Silicone Hose. Great for coolant or turbo intake plumbing. We make it easy to find the hoses that you need:  Gates PowerGrip Hose Clamps |
Congrats to Jason Vinkemulder of Mason Michigan
Jason is the most recent winner in our $5,000 sweepstakes. Every time you place an order you'll be entered. No purchase necessary. Other past winners include: Sean McGray of Las Vegas NV |
Special Message for International Customers
Export orders make up a significant portion of our sales. Because of our high volume of international shipments, we have been able to negotiate reduced rates for expedited shipping to foreign destinations. Information on International Shipping
Pegasus Supports Racing2004 thru 2024 SCCA Runoffs® Contingency Sponsor 2012 thru 2024 Vintage Sports 2000 Series Sponsor 2014 thru 2024 Formula 600 Challenge Series Sponsor VSCDA Driver's School Sponsor NSSCC Driver's School Sponsor and many other events | |
| New: Take a Virtual Tour of our Showroom and Warehouse (go through the double doors to the left of the Hawk banner to get to the warehouse) |
|---|
Pegasus is located at 2475 S. 179th Street, New Berlin WI 53146 USA
In addition to our large warehouse, we also have a small showroom and customer service counter. If you're in the area, feel free to stop by!
Click the above photo for a behind the scenes look at our warehouse expansion project.